极速赛车手机官网 极速赛车APP下载 极速赛车双面盘 极速赛车APP下载 极速赛车APP下载 极速赛车手机版下载 极速赛车双面盘 极速赛车手机版下载 极速赛车双面盘 极速赛车手机官网

 

安徽贝意克设备技术有限公司

合肥欧莱迪光电科技有限公司

 

 

我要留言

极速赛车双面盘 欢迎点击留下您宝贵的意见

我们会在第一时间给您回复

 

  • 产品名称: 碳纳米线生长设备/Equipment for producing carbon nano wire BTF-1400C-III-VT

Main features

主要特点

  公司研制的高温气相流制备连续碳纳米管纤维专用设备。由气流控制系统、液体注入系统、多段温度可控多区生长系统、水冷却系统、碳纳米管收集系统,红外烘干系统等组成。生长炉的最高温度1400,并可在0-1400之间连续可调,垂直式分布热场,两段温区,设备顶部设有注液口、导流器和反应点可调测温装置。本款碳纳米管CVD设备可以实现连续生长不间断的特点,是碳纳米管产业化的重大突破,技术国际领先。

Our special equipment for continuous carbon Nanotubes Fiber preparation by High temperature Vapor flow,consists of gas control system,liquid injection system,multi-zones tueb furnace,water cooling system,carbon nano tube clection system and infrared drying system。

The maximum temperature of the furnace can reach to 1400 ℃ and be continuously adjustable between 0-1400 ℃.

Vertical heat field, two heating zones, equipped with a liquid injection port ,fluid director and reaction point adjustable temperature measuring device on the top of the equipment。

This carbon nanotube CVD device can achieve continuous growth,a major breakthrough in the industrialization of carbon nanotubes, leading the world in technology

 

Technical Parameters

技术参数

 

工作温度

Working temp

1350

炉管

tube size

80*1400mm

加热区长度

heating zone length

750mm

恒温区长度

Constant zone length

400±10mm


收丝速度

Wire collecting speed

无级可调,可按工艺需要调整。

Stepless adjustable, adjustable according to process requirements

 

Heating Elements

加热元件

硅碳棒Silicon carbon rod

 

控温精度Temp accuracy

+/- 1 °C

炉体结构

 structure

采用双层壳体结构并带有风冷系统,保温材料为加厚型,壳体表面温度小于60℃。采用高纯氧化铝作为炉膛材料,炉膛表面涂有美国进口1750℃氧化铝涂层,可提高加热效(20%),延长仪器使用时间。

adopts double-layer shell structure and air-cooling system. The insulation material is thicker and the surface temperature of the shell is less than 60 °C. High-purity alumina is used as the furnace material, and the surface of the furnace is coated with a 1750 °C alumina coating imported from the United States, which can improve the heating efficiency (20%) and prolong the use of the instrument.

Structure design

结构设计

炉管下面加水槽,水箱支撑平台安装水箱定位块,定位精确,水箱内部安装导向杆,不用电机传动,传动杆上开槽,收丝定位准确,确保收丝点在炉管轴向中心。

Add water tank under furnace tube, install water tank positioning block on the water tank support platform, accurate positioning.Install the guiding rod inside the water tank, no motor drive is needed, slott on the drive rod , accurate position of wire collecting , ensure the wire collecting point is in the axial center of the furnace tube.

炉管下端加喇叭口,截面为方形,两个面(正面和右侧免)镶嵌一块100x100mm的有机玻璃(可视面积为70x70mm),便于观察出丝情况

The shape of tube bottom is horn mouth,section is square.There is one glass on both fromt and right side,visual area is 70*70mm for observation

溶液注射泵与炉体等高,缩短注射器至炉体注液口距离,注射泵和注液口用软管相连接。气路管道全部为不锈钢管

Injection pump equal altitude with furnace,shorten the distance between injector and port at tube.Hose connections for injection pumps and injectors. All gas piping are stainless steel tubes

炉内注液口喷嘴温度可测量,法兰经过改装为铠装法兰,方便测温

炉管下端法兰采用水冷法兰,(水冷机客户自备。)

The nozzle temperature in the furnace can be measured, and the flange is converted into a sheathed flange, convenient to measure the temperature。The lower end of furnace adopts water cooled flange ( water cooling unit self-provided by customer)

 

 

 

 

极速赛车手机官网 极速赛车APP下载 极速赛车双面盘 极速赛车APP下载 极速赛车APP下载 极速赛车手机版下载 极速赛车双面盘 极速赛车手机版下载 极速赛车双面盘 极速赛车手机官网